The PIP S10HTP/2BK-NW-ES6-18T is a single-ply, high-tenacity polyester sleeve designed to deliver lightweight cut resistance using ATA Technology HTP fiber. It provides ANSI A2 cut protection and is offered in three widths—narrow, standard, and wide—to accommodate different arm sizes and fit preferences, with color-coded overedge (red for narrow, yellow for standard, green for wide) to aid quick identification. A non-slip top arm option helps keep the sleeve in place, while the knit wrist design minimizes binding and maintains protection from top to bottom. The sleeve is built with machine-knit construction and is rated for abrasion resistance at Level 2 with 700 abrasion cycles, reflecting a balance between protection and wear life for typical usage scenarios.
The liner material combines high-tenacity polyester with ATA Fiber Technology, emphasizing a lightweight profile that does not compromise safeguarding. The product supports practical maintenance and sustainability through machine washing and a recommended wash temperature of 40°C, with tumble drying at low heat. It is reusable and launderable, and is recyclable through Terracycle, aligning with responsible disposal options where available.
In daily use, these sleeves are suitable for workers requiring arm protection that fits a range of arm sizes while allowing ease of movement. They are intended for environments where ANSI A2 cut resistance and moderate abrasion performance are appropriate, and they come in bulk banded packaging, with a case quantity of 72 and an itemized packaging of one sleeve per package.
Features:
- ANSI A2 cut protection with lightweight ATA Technology
- Three widths available for personalized fit; narrow, standard, wide
- Color-coded overedge to indicate sleeve width
- No-Slip top elastic to help keep sleeves in place
- Knit wrist stays in place with consistent protection
- ASTM D3884-09 Level 2 abrasion resistance
- Liner Material:
- High-Tenacity Polyester, ATA Fiber Technology
- Sustainability:
- Recyclable via Terracycle Program, Reusable / Launderable
- ANSI Method:
- TDM
- ANSI Gram:
- 541
- ANSI Cut Level:
- A2
- ANSI Abrasion Level:
- 2
- ANSI Abrasion Cycles:
- 700
- Construction:
- Machine Knit
- Ply:
- Single-Ply
- Top Arm Option:
- Non-Slip
- Finger Thumb Option:
- --Thumb Hole--
- Packaging:
- Bulk Banded
- Taa Comp:
- 1
- High Frequency:
- 0
- Medium Frequency:
- 0
- Low Frequency:
- 0
- Wash Instructions:
- Machine Wash
- Wash Temp:
- Water Temp 40°C
- Bleach:
- Do Not Bleach
- Dry Instructions:
- Tumble Dry
- Dry Temp:
- Low Heat
- Package Size:
- Each
- Case Quantity:
- 72
