The PIP S10HTP/2BK-NW-ES6-12T is a single-ply high-tenacity polyester sleeve designed to provide ANSI A2 cut protection with lightweight wearability. The ATA Technology HTP fiber blend delivers cut resistance while maintaining comfort, making it suitable for workers who need protective coverage without excess bulk. Sleeves are offered in three widths—narrow, standard, and wide—to accommodate different arm sizes, with a color-coded overedge indication to simplify fit and sorting (red = narrow, yellow = standard, green = wide). A non-slip top arm option helps keep the sleeve in place during movement, and the knit wrist helps maintain coverage from top to bottom without excessive constriction.
Constructed with a machine-knit, single-ply liner of high-tenacity polyester enhanced by ATA Fiber Technology, this sleeve also provides a measured level of abrasion resistance (ANSI Abrasion Level 2 with 700 cycles) to withstand repetitive contact in common tasks. The design includes a secure, non-elastic knit at the wrist to reduce binding while preserving protection along the arm. For users prioritizing sustainability and reusability, the sleeve is recyclable through the Terracycle program and is launderable for repeated use, aligning with maintenance workflows in many facilities.
Practical use scenarios include tasks requiring arm protection during handling, material processing, or assembly where light to moderate cut resistance is beneficial. The sleeve is machine washable at up to 40°C and tumble dries on low heat, facilitating routine cleaning and maintenance. Packaging is bulk-banded with each unit, and case quantity is 72 pieces, which supports bulk stocking while allowing individual sizing to match worker needs. The product is listed with clear compatibility in terms of sizing (narrow, standard, wide) and top-arm non-slip features, aiding correct selection for fit and performance in real-world workflows.
Features:
- ATA Technology provides ANSI A2 cut protection and comfort
- Available in narrow, standard, and wide widths for personalized fit
- Color-coded overedge indicates width: red (narrow), yellow (standard), green (wide)
- No-Slip elastic at the top helps keep sleeves in place
- Knit wrist stays in place with cut protection from top to bottom
- ASTM D3884-09 Level 2 abrasion resistant
- Liner Material:
- High-Tenacity Polyester, ATA Fiber Technology
- Sustainability:
- Recyclable via Terracycle Program, Reusable / Launderable
- ANSI Method:
- TDM
- ANSI Gram:
- 541
- ANSI Cut Level:
- A2
- ANSI Abrasion Level:
- 2
- ANSI Abrasion Cycles:
- 700
- Construction:
- Machine Knit
- Ply:
- Single-Ply
- Top Arm Option:
- Non-Slip
- Finger Thumb Option:
- --Thumb Hole--
- Packaging:
- Bulk Banded
- Taa Comp:
- 1
- High Frequency:
- 0
- Medium Frequency:
- 0
- Low Frequency:
- 0
- Wash Instructions:
- Machine Wash
- Wash Temp:
- Water Temp 40°C
- Bleach:
- Do Not Bleach
- Dry Instructions:
- Tumble Dry
- Dry Temp:
- Low Heat
- Package Size:
- Each
- Case Quantity:
- 72
