The PIP 9100-2000E-GR is a gray AR/FR dual-certified coverall designed for workers in electrical, utilities, petrochemical, oil, gas, mining, and welding environments. It features a 7 oz. flame-resistant cotton fabric and a two-way front brass zipper set on aramid tape, with a storm guard over the zipper to help keep out sparks and contaminants. The garment includes a protective shirt collar, a flexible side elastic waist, and multiple pockets (two chest pockets with snap-closed flaps, plus two waist and two rear hip pockets) to support convenient tool and accessory storage. Arm cuffs offer two-position snap closures, and the seams are reinforced with aramid high-tenacity thread and bar-tack reinforcement at stress points to help maintain integrity during movement and bending. The design emphasizes mobility, including an action back for enhanced range of motion, while maintaining clear AR/FR performance as indicated by its ATPV 9 cal/cm2 rating and dual certification to NFPA 70E (ASTM F1506) and NFPA 2112-2023 standards.
Practical use considerations include its reusable/launderable cotton FR fabric and care guidance that calls for synthetic detergents while avoiding bleach or hydrogen peroxide-containing products to preserve protective properties. The coverall is bagged per unit and packaged with a case quantity of 12, making it suitable for facility-wide PPE programs. It is compatible with environments where both arc-flash resistance and flame resistance are required, and it adheres to the listed standards and performance indicators that matter for compliance documentation and job-site audits. For ordering or sizing specifics, refer to the spec sheet linked in the downloads section.
Features:
- ARC Rating: ATPV 9 cal/cm2
- 7 oz FR cotton
- 2 way front brass zipper on aramid tape
- Storm guard over front zipper
- 6 pockets (2 chest, 2 waist, 2 rear hip)
- Protective shirt collar; side elasticized waist
- Arm cuffs with two position snap closure
- All metal parts thermally protected from skin
- Aramid high tenacity FR thread; bar-tacked stress points
- Action back for mobility
- Dual-certified to NFPA 70E/ASTM F1506 and NFPA 2112-2023
- Color:
- Gray
- Sustainability:
- Reusable / Launderable
- Weight:
- 7oz
- HRC Method:
- ATPV
- HRC Level:
- 2
- HRC Cal:
- 9
- 29 Cfr:
- 1
- Closure:
- Zipper
- NFPA 70E:
- 1
- NFPA 1975:
- 1
- NFPA 2112:
- 1
- Ul Certified:
- 1
- ASTM F1506:
- 1
- Pockets:
- 6
- Fabric:
- Cotton
- Pocket Type:
- --Chest Pocket--Rear Hip Pocket--Waist Pocket--
- Clothing Type:
- Coveralls
- Packaging:
- Bagged Each
- Taa Comp:
- 0
- High Frequency:
- 0
- Medium Frequency:
- 0
- Low Frequency:
- 0
- Care Instructions:
- Only synthetic detergents should be used on this AR/FR garment. Do not use bleach, starch, fabric softeners or detergents containing hydrogen peroxide on this garment as they could negatively affect the protective properties.
- Wash Instructions:
- Machine Wash
- Wash Temp:
- Water Temp 60°C
- Bleach:
- Do Not Bleach
- Dry Instructions:
- Tumble Dry
- Dry Temp:
- Low Heat
- Package Size:
- Each
- Case Quantity:
- 12
