The CGW 45103 cutting wheel is designed for general-purpose metalworking, specifically for cutting steel. It is a 4-1/2 inch diameter wheel with a thickness of .045 inches and an 7/8 inch arbor, formulated with aluminum oxide abrasive for effective material removal in typical fabrication and maintenance tasks. This Type 27 wheel is suited for angle grinders and similar equipment used in metal fabrication settings where a flat-to-cone mounting face is required for consistent cuts along the workpiece edge.
Key construction characteristics include an aluminum oxide grain bonded to a suitable matrix to deliver a 60-grit finish and a hardness rating of T, which helps balance cutting aggressiveness with durability during repeated passes. The wheel is rated for up to 13,300 RPM, aligning with standard performance specifications for medium-duty cutting tasks. Each wheel is packaged as an individual item, with a bulk option available in boxes of 25, supporting varied workload needs in maintenance shops or manufacturing floors.
When selecting this wheel, consider the material compatibility (steel) and the intended cut style to ensure proper wheel and grinder matching. Verify that your equipment arbor matches the 7/8 inch shank size and that the operating RPM does not exceed the wheel’s 13,300 RPM rating. Routine inspection for wear, cracks, or damage is advised, and wheel guards should be used to contain debris. This product adheres to standard maintenance-shop practices, delivering a reliable option for general-purpose steel cutting without relying on specialty or high-tolerance applications.
Features:
- Aluminum oxide grain for cutting steel
- General purpose cutting wheel
- Type 27 configuration
- 4-1/2" diameter, 0.045" thickness
- 7/8" arbor, 60 grit (Grit: 60)
- Hardness: T; RPM: 13,300
- Box quantity: 25
- Grain:
- Aluminum Oxide
- Dia:
- 4.5
- Thickness:
- .045
- Arbor/Shank Size:
- 7/8
- Type:
- 27
- Grit:
- 60
- Grade/Hardness:
- T
- RPM:
- 13300
- Package Size:
- Each
- Box Quantity:
- 25
