The Draeger 6733171 Gas Detector Tube is a single-use colorimetric tube designed for the rapid detection of aniline vapor in air. This tube, used with a compatible Draeger tube pump, provides a straightforward, economical method for estimating gas concentration in the 0.5 to 10 ppm range. Each box contains 10 tubes, with a break-off tip to enable controlled sampling and a glass tube construction that is standard for Draeger’s diffusion- and pump-based measurement systems. The measurement time is approximately four minutes per test, offering a quick read on exposure potential in work areas where aniline might be present.
Key construction features include a glass tube with a break-off tip that enables precise sampling, and a defined measurement range of 0.5–10 ppm for aniline with a stated 0.5 ppm resolution. This setup is compatible with Draeger’s tube-pump sampling approach, which is widely used for spot checks and field surveys where immediate, short-duration monitoring is appropriate. While the data here does not specify certifications or detailed material safety properties beyond the listed construction and range, the tube’s documented function aligns with classic colorimetric gas analysis techniques for target vapors in ambient air. Practitioners should follow the manufacturer’s testing protocol, ensure the correct pump and accessories are used, and replace tubes after use to maintain accuracy of readings. Packaging is box-based with ten tubes per box, which supports batch testing or multi-location checks without frequent restocking.
Features:
- Detects aniline in air
- Measurement range: 0.5–10 ppm
- Measurement time: 4 minutes
- Tube material: Glass
- Break-off tip for simple sampling
- Package size: Box
- Quantity: 10 tubes per box
- Gas Detected:
- Aniline 0.5/a
- Standard Range Of Measurement:
- 0.5 - 10 ppm
- Measurement Time:
- 4 Min
- Tube Material:
- Glass
- Break-Off Tip:
- Yes
- Package Size:
- Box
- Box Quantity:
- 10/Box
