The PIP S10HTP/2BK-ES6-22T sleeve is a single-ply, high-tenacity polyester garment designed to provide ANSI A2 cut resistance with lightweight comfort. It employs ATA Technology HTP fiber for protective performance while remaining easy to wear under long shifts. The sleeve is available in three widths—narrow, standard, and wide—to accommodate various arm sizes and to help workers find a personalized, secure fit. A color-coded overedge (red for narrow, yellow for standard, green for wide) aids quick visual sorting, and the non-slip top arm features help keep the sleeve positioned during use. The knit-wrist construction reduces binding while maintaining coverage from wrist to upper arm, contributing to cut protection throughout the sleeve length. The product meets abrasion resistance at ASTM D3884-09 Level 2 with 700 abrasion cycles, indicating durability in typical material-handling or processing tasks.
Constructed with a machine-knit process, this sleeve uses a high-tenacity polyester liner reinforced by ATA fiber technology. It is designed for reuse and laundering, with machine-wash compatibility and a low-temperature tumble-dry option. The sleeve is packaged bulk-banded for bulk distribution and ships as a single-ply unit, with a case quantity of 72 sleeves for stocking and replenishment. Sustainability considerations note that it is recyclable via the Terracycle program and reusable/launderable, aligning with maintenance practices that seek to extend part life while reducing waste.
This sleeve is suitable for use in environments where hand protection from cuts is required without sacrificing mobility. It is compatible with general-purpose tasks that involve potential contact with sharp-edged materials, and it is designed to be worn under other PPE as needed. When selecting sizing, refer to the color-coded width and ensure proper fit to maximize effectiveness of the cut resistance and to minimize sleeve movement during tasks.
Features:
- ANSI A2 cut resistance with Lightweight ATA Technology
- Available in three widths: narrow, standard, wide
- Color-coded overedge for easy width identification (red, yellow, green)
- No-Slip top edge and knit wrist for secure fit and coverage
- Thumb hole option provides added comfort and fit
- Machine washable; low-heat tumble dry
- Single-Ply construction with High-Tenacity Polyester ATA Fiber
- Liner Material:
- High-Tenacity Polyester, ATA Fiber Technology
- Sustainability:
- Recyclable via Terracycle Program, Reusable / Launderable
- ANSI Method:
- TDM
- ANSI Gram:
- 541
- ANSI Cut Level:
- A2
- ANSI Abrasion Level:
- 2
- ANSI Abrasion Cycles:
- 700
- Construction:
- Machine Knit
- Ply:
- Single-Ply
- Top Arm Option:
- Non-Slip
- Finger Thumb Option:
- --Thumb Hole--
- Packaging:
- Bulk Banded
- Taa Comp:
- 1
- High Frequency:
- 0
- Medium Frequency:
- 0
- Low Frequency:
- 0
- Wash Instructions:
- Machine Wash
- Wash Temp:
- Water Temp 40°C
- Bleach:
- Do Not Bleach
- Dry Instructions:
- Tumble Dry
- Dry Temp:
- Low Heat
- Package Size:
- Each
- Case Quantity:
- 72
