The PIP MSK-12 is a 2-ply aramid sleeve designed to protect the wrists and forearms from cuts and heat. Built with an inherently flame-resistant aramid fiber blend, this seamless knit sleeve can withstand temperatures up to 284°F (or 640°F/337°C for heat resistance) without supporting a flame, providing a buffer between skin and potential hot or sharp surfaces while remaining lightweight for extended wear. The product is launderable, allowing for multiple uses and reduced replacement costs, and is manufactured in the USA.
Construction emphasizes a seamless knit for a soft, comfortable feel that minimizes irritation during prolonged use. The sleeve uses a 2-ply design to balance durability with flexibility, and top-arm option is listed as an elastic cuff to help secure the sleeve during movement. It is compatible with machine washing (40°C) and tumble drying on low heat, which supports routine cleaning in industrial settings. The sleeve is recyclable via the Terracycle program and reusable/launderable, aligning with sustainable maintenance practices.
Practical use considerations include ANSI method TDM with an ANSI cut level A3 and ANSI abrasion level 1, supported by 200 abrasion cycles. The ASTM F1060 rating indicates performance characteristics relevant to standards-based protection, and the nominal construction is listed as Seamless Knit. Packaging is bulk, with each item individually packable, and case quantity is 200 for inventory planning. For additional product details, a spec sheet is available for download.
Features:
- Aramid provides cut protection and heat resistance for wrists and arms
- Inherently flame resistant; withstands heat up to 640° F (337°C) without supporting a flame
- Lightweight, seamless construction for comfort
- Launderable for extended life and reduced replacement costs
- Made in the USA
- 2-Ply construction with elastic cuff option
- Bulk packaging; case quantity 200
- Liner Material:
- Aramid
- Sustainability:
- Recyclable via Terracycle Program, Reusable / Launderable
- ANSI Method:
- TDM
- ANSI Gram:
- 1018
- ANSI Cut Level:
- A3
- ANSI Abrasion Level:
- 1
- ANSI Abrasion Cycles:
- 200
- Construction:
- Seamless Knit
- ASTM F1060:
- 2
- ASTM F1060 Temp:
- 284° F
- Ply:
- 2-Ply
- Top Arm Option:
- Elastic Cuff
- Packaging:
- Bulk Pack
- Acquired:
- Worldwide Protective Products (WPP)
- Taa Comp:
- 1
- High Frequency:
- 0
- Medium Frequency:
- 0
- Low Frequency:
- 0
- Wash Instructions:
- Machine Wash
- Wash Temp:
- Water Temp 40°C
- Bleach:
- Do Not Bleach
- Dry Instructions:
- Tumble Dry
- Dry Temp:
- Low Heat
- Package Size:
- Each
- Case Quantity:
- 200
