CGW 35622 4-1/2" X 1/4" X 7/8" A24-N Type 27 24-Grit Fast Cut Aluminum Oxide Grinding Wheel

The CGW 35622 grinding wheel is a 4-1/2 inch diameter, 1/4 inch thick, 7/8 inch arbor aluminum oxide wheel designed for fast stock removal on flat or beveled surfaces. It features an A24-N Type 27 profile, which is commonly used for grinding off angles and edges on non-ferrous materials and some metals, providing a recessed grinding surface that helps control material removal. The wheel uses aluminum oxide grain paired with a soft N-grade bond, a combination that favors rapid material removal while maintaining practical wheel life in appropriate applications. This balance between grain and bond helps operators achieve efficient grinding without excessive wheel wear when used under suitable cutting conditions.

In practice, this wheel is suited for applications where a high material removal rate is desired on aluminum and similar substrates, particularly where a 24-grit texture is appropriate for fast stock reduction. The Type 27 profile is typical for general purpose surface grinding or deburring tasks on angles and edges, offering a flatter contact with workpieces that require aggressive cutting action while preserving a relatively smooth finish on the surrounding area. When selecting this wheel, ensure your tooling and grinder rpm can accommodate the rated operating speed of 13,300 RPM and that the wheel size and arbor match your machine’s specifications.

This wheel ships as a single unit in a boxed package, with CGW part number CGW35622, and is intended for facility maintenance use. The 4-1/2 inch diameter, 1/4 inch thickness, and 7/8 inch arbor size must align with compatible grinders and guards. For best results, match the wheel’s grit and bond to your material and desired finish, observe manufacturer safety requirements, and inspect the wheel for cracks or damage before mounting.

Features:

• Aluminum Oxide grain for versatile use
• Soft N-grade bond supports fast stock removal
• Type 27 wheel geometry for angled grinding
• 4-1/2" diameter with 1/4" thickness
• 7/8" arbor size for compatible grinders
• Grit 24 for aggressive material removal