CGW 45011 5" X .040" X 7/8" Type 1 60-Grit Zirconia Cutting Wheel

The CGW 45011 is a 5-inch, Type 1 cutting wheel designed for industrial metalworking tasks. It features a 0.040-inch thickness and a 7/8-inch arbor, making it compatible with standard 5-inch cutoff tools and grinders that accept 7/8-inch arbors. The wheel’s 60-grit composition combines zirconia and aluminum oxide, balancing aggressive cutting action with durability to extend wheel life on steel and stainless steel applications.

This wheel is engineered to deliver efficient material removal while maintaining a practical balance between cutting speed and endurance. The zirconia-alumina blend is chosen to support faster cutting compared with some traditional ceramic blends, and the Type 1 configuration provides a flat-face wheel suitable for including flush cuts and precise edge work when used with compatible abrasive tools. The listed RPM rating of 12,200 indicates the operating speed at which the wheel has been tested for safe performance, so operators should ensure their equipment can accommodate this speed and that the wheel is installed correctly with appropriate guards and PPE.

Recommended use cases include cutting and light fabrication tasks on mild steel and stainless steel where a robust, wear-resistant wheel is beneficial. When selecting this wheel, confirm the shank size and arbor compatibility with the machine being used, and verify that the wheel is within its packaging and handling guidelines to avoid damage prior to installation. Packaging specifies that each wheel is sold individually, with 25 units per box, which may influence stocking and order planning for maintenance operations.

Features:

• CGW Quickie Cut offers strong performance and value
• Zirconia and aluminum oxide blend for faster cutting and longer life
• Effective on steel and stainless steel
• 5" diameter, .040" thickness, 7/8" arbor
• Type 1 profile with 60 grit finish
• Hardness T for balanced cut and durability
• Rated up to 12,200 RPM