The Draeger CH24201 gas detector tube is designed for qualitative to semi-quantitative measurement of sulfur dioxide in ambient air using a standard Draeger tube with a pump. This specific tube targets sulfur dioxide in a range of 20 to 200 ppm and is packaged as a box containing 10 tubes. The 3-minute measurement time aligns with Draeger’s traditional tube-based gas analysis method, enabling rapid field screening or troubleshooting in processes where SO2 exposure is a concern.
Constructed with glass tubing and featuring a break-off tip, these Draeger tubes are intended for use with the matching Draeger pump to pull a known air volume through the tube, producing a colorimetric or chemical indication corresponding to the sulfur dioxide concentration. The box quantity of 10 tubes provides multiple uses per purchase and helps support periodic monitoring routines or spill response checks without frequent reorders.
Practical use considerations include ensuring correct tube selection for the target gas and range, following the standard sampling protocol, and recognizing that results are best understood as indicative values suitable for screening rather than precise analytical measurements. Compatibility with the Draeger tube pump and adherence to manufacturer instructions are essential for obtaining reliable results and consistent data collection in field or shop-floor environments.
Features:
- Gas detected: Sulfur Dioxide (SO2)
- Measurement range: 20 - 200 ppm
- Measurement time: 3 minutes per test
- Tube material: Glass
- Break-off tip: Yes
- Package size: Box
- Box quantity: 10 per box
- Gas Detected:
- Sulfur Dioxide 20/a
- Standard Range Of Measurement:
- 20 - 200 ppm
- Measurement Time:
- 3 Min
- Tube Material:
- Glass
- Break-Off Tip:
- Yes
- Package Size:
- Box
- Box Quantity:
- 10/Box
