Draeger 8101321 Gas Detector Tube, Water Vapor 0.1/a, 10/Box

The Draeger 8101321 Gas Detector Tube is a ready-to-use measurement device designed to detect water vapor concentrations in air. Packaged as a box of ten tubes, each unit is intended for use with a Draeger tube pump to facilitate quick, on-site analysis of gas-phase moisture content. The system relies on established diffusion-and-colorimetric principles typical of Draeger tubes, providing a tangible readout of moisture levels within the specified range.

Constructed with a glass tube and featuring a break-off tip for convenient sampling, the 0.1-1.0 mg/L measurement range is appropriate for detecting moderate to lower moisture levels in workplace air. A typical sampling procedure involves breaking the tip, drawing a known volume of air through the tube using the pump, and reading the result after the stated reaction time of about 1.5 minutes. The 0.1 a notation indicates the target indicator for water vapor, aligning with Draeger’s documentation for this specific tube type. The packaging as a 10-tube box supports batch testing or multiple sampling points across a site, which helps maintain throughput on busy work orders or during periodic air-quality checks.

When selecting these tubes, ensure compatibility with your Draeger pump and review the measurement range to match your monitoring needs. The glass tube design and break-off tip are standard features that support straightforward handling and disposal. Since the data provided specifies a single gas target and a defined time-to-read, this product is best suited for rapid screening rather than continuous monitoring, and should be used by personnel trained in Draeger tube procedures and interpreting colorimetric results.

Features:

• Gas Detected: Water Vapor 0.1/a
• Standard Range: 0.1 - 1.0 mg/L
• Measurement Time: 1.5 minutes
• Tube Material: Glass
• Break-Off Tip: Yes
• Package Size: Box
• Box Quantity: 10 per Box