The Draeger 6723301 gas detector tube is a mono-styrene indicator designed for use with a Draeger tube pump to measure concentrations of monostyrene in ambient air. With a standard measurement range of 10–200 ppm and a short sampling time of approximately 3 minutes, it provides a quick, point-in-time assessment of potential exposure in industrial settings where volatile organic compounds may be present.
Constructed with a glass tube and featuring a break-off tip for controlled sampling, this kit is packaged as a box containing 10 tubes per box. Each tube is designed for single-use quantitative indication, matching the typical Draeger tube methodology used for gas and vapor analysis. The 10/a format indicates ten attenuation steps or a specific calibration within the tube, aligning with Draeger’s established colorimetric or diffusion-based reading methods, depending on the tube design.
When using this product, ensure proper training in tube-pump operation and colorimetric interpretation, and follow your workplace exposure assessment protocols. The 6723301 is compatible with standard Draeger pump systems that accept monostyrene tubes and are used for rapid screening in environments where styrene-related exposure might occur. Consider packaging and storage guidelines to maintain tube integrity between uses, and verify that the measurement time and range align with your monitoring objectives and regulatory requirements.
Features:
- Measurement range: 10-200 ppm
- Measurement time: 3 minutes
- Monostyrene 10/a gas detected
- Glass tube with break-off tip
- Package: Box, 10 tubes per box
- Part number: 6723301
- Gas Detected:
- Monostyrene 10/a
- Standard Range Of Measurement:
- 10 - 200 ppm
- Measurement Time:
- 3 Min
- Tube Material:
- Glass
- Break-Off Tip:
- Yes
- Package Size:
- Box
- Box Quantity:
- 10/Box
