The OELIT-10357 is a 7mm socket designed for 1/4 in. drive applications, built to support insulated electrical work with enhanced safety features. This deep socket provides access to recessed fasteners in tight spaces, while its insulated construction targets protection during electrical tasks. The tool is described as having a double insulation design and carries a lifetime warranty, aligning with OEL’s safety-focused tooling approach.
Construction and features emphasize electrical insulation ratings and impact resistance. The socket is rated for insulation up to 1000V AC and 1500V DC maximum exposure, with an arc rating of 1000VAC. It is tested to withstand up to 10,000V AC during qualification, supporting use in environments where electrical hazards are present. The tool meets IEC 60900 standards for insulated hand tools and is specified to exceed certain performance expectations under ASTM 1505, with additional alignment to OSHA-related requirements and NFPA 70E guidance. These standards-oriented claims indicate suitability for tasks in electrical maintenance and similar safety-critical roles.
Users should consider the compatibility of a 1/4 inch drive socket with their existing ratchets or power tools, noting the 7mm size and the 12-point configuration for specific fastener engagement. The product is positioned for professional use in electrical and maintenance settings where insulation and electrical safety are priorities, with attention to handling and storage to preserve insulation performance. Packaging is listed as individual units, suitable for insertion into tool kits or workstations that require insulated hand tools. Maintain appropriate care to ensure continued insulation integrity and compliance with applicable safety standards when using the tool in live or potential live electrical environments.
Features:
- Meets IEC 60900 Standard for Insulated Hand Tools
- Exceeds ASTM F1505 Standards for Insulated Hand Tools
- Helps meet OSHA Requirements 29 CFR Part 1910.331-335
- Subpart S; 29 CFR Part 1910.269 Subpart K
- Meets NFPA 70E Requirement
- Tested to 10,000 VAC and rated for 1,000 VAC/1,500 VDC Maximum Exposure
- Impact Resistant and Flame Retardant
- Size:
- 7MM
- Points:
- 12
- Arc Rating:
- 1000VAC
- Drive:
- 1/4
- Package Size:
- Each
