The Cordova 7760 is a cut-resistant glove designed for jobs that require a blend of grip, impact protection, and tactile control. It uses an 18-gauge blue CRX fiber shell that provides a lightweight, cut-resistant barrier without relying on glass or steel fibers. A black sandy-nitrile palm coating delivers moisture resistance and improved grip in a variety of hand-hygiene and handling tasks, while sonic-welded TPR protectors offer impact attenuation at the knuckles and fingers. The gloves are touchscreen compatible, allowing use with mobile devices or control panels without removal, which can help maintain workflow continuity on the shop floor. The product carries ANSI Cut Level A2, indicating capability against moderate cut hazards, and ANSI Impact Level 1 for basic impact protection.

The OGRE CRX-2 glove is positioned for “down and dirty” environments common in oil, gas, and refining work, or any setting requiring robust grip and protection during material handling, small-part assembly, packaging, and general maintenance. The construction prioritizes comfort and dexterity, with CRX fiber designed to avoid traditional glass- or steel-reinforcement while still delivering respectable cut resistance. The sandy-nitrile palm coating enhances grip and durability in oily or wet conditions, reducing slippage during precision handling.

Each case contains 72 pairs, with packaging configured to support bulk distribution and easy stocking in industrial environments. The gloves are suitable for use in warehousing, automotive assembly, forestry, and pulp & paper workflows where light to moderate cut hazards may occur. Like any PPE, evaluate the specific task hazards to ensure the A2 cut rating and Level 1 impact protection align with the demands of the job, and consider compatibility with touchscreen controls and chemical exposure where applicable.

Features:

18-gauge blue CRX shell
Sonic-Welded TPR impact protection
Black sandy nitrile palm coating
Touchscreen compatible
ANSI Cut Level A2
ANSI Abrasion Level 4
ANSI Puncture Level 3

ANSI Cut Level A2

ANSI A2 provides light cut resistance for tasks with limited exposure to sharp edges. It is commonly suited for general material handling, assembly, packaging, warehouse operations, maintenance, and other applications where light cut protection and good dexterity are needed.

Understanding ANSI Cut Levels

ANSI/ISEA 105 cut ratings range from A1 to A9. Higher ratings indicate greater cut resistance:

A1–A2: Light cut protection

A3–A4: Light-to-medium cut protection

A5–A6: Medium-to-high cut protection

A7–A8: High cut protection

A9: Maximum cut protection

ANSI Abrasion Level 4

ANSI Abrasion Level 4 provides high abrasion resistance for demanding tasks involving frequent contact with rough surfaces and materials. It is commonly suited for construction, automotive manufacturing, metal handling, maintenance, material handling, and other applications where increased durability and wear resistance are needed.

Understanding ANSI Abrasion Levels

ANSI/ISEA 105 abrasion ratings measure a glove material’s ability to withstand wear caused by repeated rubbing and friction. Ratings range from Level 0 to Level 6, with higher levels indicating greater abrasion resistance and durability. Lower levels are generally suited for lighter-duty tasks, while higher levels are designed for demanding applications involving frequent contact with rough or abrasive surfaces.

ANSI Abrasion Level 0: Minimal abrasion resistance

ANSI Abrasion Level 1: Light abrasion resistance

ANSI Abrasion Level 2: Light-to-moderate abrasion resistance

ANSI Abrasion Level 3: Moderate abrasion resistance

ANSI Abrasion Level 4: High abrasion resistance

ANSI Abrasion Level 5: Very high abrasion resistance

ANSI Abrasion Level 6: Maximum abrasion resistance

ANSI Puncture Level 3

ANSI Puncture Level 3 provides moderate puncture resistance for tasks involving regular exposure to puncture hazards. It is commonly suited for manufacturing, construction, maintenance, material handling, and other applications requiring increased protection and durability.

Understanding ANSI Puncture Levels

ANSI/ISEA 105 puncture ratings measure a glove material’s resistance to penetration from a standardized blunt probe. Ratings range from Level 0 to Level 5, with higher levels indicating greater puncture resistance. Lower levels are suited for lighter-duty applications, while higher levels provide increased protection for demanding tasks involving materials or objects that may puncture the glove.

ANSI Puncture Level 0: Minimal puncture resistance

ANSI Puncture Level 1: Light puncture resistance

ANSI Puncture Level 2: Light-to-moderate puncture resistance

ANSI Puncture Level 3: Moderate puncture resistance

ANSI Puncture Level 4: High puncture resistance

ANSI Puncture Level 5: Maximum puncture resistance

CRX Fiber

CRX Fiber is a high-performance material designed to provide enhanced cut resistance while maintaining the flexibility and dexterity needed for hands-on work. Its strong, lightweight construction helps protect against sharp edges and abrasive materials without excessive bulk, making it a good choice for work gloves and other PPE used in material handling, manufacturing, assembly, and general industrial applications.

Material:: CRX Fiber
Gauge:: 18
ANSI Cut Level:: A2
ANSI Abrasion Level:: 4
ANSI Puncture Level:: 3
Touchscreen Compatible:: Yes
Proposal 65:: Yes
Case Quantity:: 72 Pair/Case
Package Size:: Pair
Custom Print Gloves:: Yes
Cordova Product Type:: Gloves

What materials or construction does the Cordova 7760 glove feature?

It features an 18-gauge blue CRX shell made from CRX fiber, with a black sandy nitrile palm coating and sonic-welded TPR impact protection.

What are the key technical specifications for this glove?

Material is CRX Fiber; Gauge is 18; ANSI Cut Level A2; ANSI Abrasion Level 4; ANSI Puncture Level 3; Touchscreen Compatible is Yes; Prop 65 Yes; Case Quantity 72 Pair/Case; Package Size is Pair; Custom Print Gloves Yes.