CGW 49751 4-1/2" X 1/8" X 5/8"-11 ASL36-P Type 27 24-Grit Ceramic Green Wheel

CGW 49751 is a 4-1/2 inch diameter, 1/8 inch thick, 5/8-11 arbor ceramic grinding wheel designed for Type 27 depressed center grinding applications. The wheel features a high concentration of ceramic grain, which supports fast material removal and extended wheel life when used on a variety of metals. It is manufactured with a ceramic grain formulation that contains less than 0.1% iron, sulfur, and chlorine, helping minimize contamination for certain metalworking protocols. The wheel is configured for high-speed grinding, with a rated RPM of 13,300, making it suitable for aggressive material removal on stainless steel, steel, hard face alloys, titanium, inconel, and aluminum in appropriate grinding setups.

This CGW wheel is optimized for applications where durable, sharp abrasive action is required in a Type 27 configuration, which provides grain exposure to contact with the workpiece while maintaining a depressed center for balance and control during grinding. The 24-grit size offers a balance between material removal rate and surface finish, and the S hardness rating indicates a relatively rigid wheel intended for demanding grinding tasks. The package listing notes each wheel is packaged individually with a typical box quantity of 10 per package, aligning with common procurement and stocking practices for industrial grinders.

When selecting and using this wheel, ensure compatibility with your grinder spindle and safe-operating procedures for depressed-center wheels. Confirm that the workpiece material and joint design are appropriate for ceramic grain wheels, and verify workpiece contamination control requirements given the low trace elements stated in the formulation. Appropriate clamping, guards, and PPE should be used, and wheel speed must not exceed the rated RPM to prevent wheel failure or injury.

Features:

• High concentration of ceramic grain for fast grinding and long life.
• Iron, sulfur, and chlorine content <0.1% for cleaner grinding.
• Type 27 configuration with 4-1/2" diameter and 24-grit ceramic surface.
• Arbor size 5/8-11 for compatible mounting.
• Versatile use on stainless steel, steel, hard face, titanium, inconel, and aluminum.
• RPM rated to 13300 for demanding grinding applications.