Light Efficient Design LED-8061E22 LED Filament HID Retrofit Lamp - E26 - 28W - 2200K - 3,500 Lumens - 120-277V

The LED-8061E22 is a LED retrofit lamp designed to replace HID lighting in decorative post-top fixtures and similar luminaires. It delivers 3,500 lumens at a 2,200 K color temperature, providing a warm, amber-toned light intended to mimic traditional HID appearance while benefiting from solid-state efficiency. The lamp uses a Medium E26 base and operates on 120–277 V with a ballast-bypass (Type B) configuration, which eliminates ballast power losses and reduces maintenance components in compatible fixtures. With a 360-degree beam angle and a form factor that mimics standard HID lamps, it can fit in applications seeking familiar light distribution without changing the fixture layout. The product is rated for enclosed fixtures, and its 50,000-hour expected life supports reduced replacement cycles in appropriate installations.

Key distinguishing features include its UL-approved status for use in enclosed fixtures and a wide operating temperature range from -40°F to 113°F, making it suitable for exposed or outdoor-rated indoor environments where temperature conditions vary. The lamp is marketed as an HID-equivalent retrofit, aiming to provide comparable light distribution and lamp shape while leveraging LED reliability and efficiency. The 28-watt consumption compared to a typical 150-watt HID lamp offers substantial energy savings, assuming the fixture and ballast configuration are compatible with ballast bypass operation and the E26 socket standard. When planning retrofit projects, confirm fixture compatibility, enclosure rating, and dimming or control considerations if applicable.

In terms of compatibility and installation considerations, this LED-8061E22 is sized to approximate the HID form factor and includes a 360-degree beam pattern suitable for general illumination in decorative or post-top installations. The unit’s stated dimensions (approximately 3 inches in width and height with a 7.6-inch length) and its enclosure-rated design should be verified against the target fixture’s ballast, socket, and enclosure specifications. As always with ballast-bypass LEDs, ensure the fixture wiring and local electrical codes permit direct mains connection and that any applicable safety requirements are followed during retrofitting. This product is designed for single-lamp retrofits where an E26-base, 120–277 V LED solution is appropriate and where the user intends to replace a 150 W HID with a 28 W LED.

Features:

• 120-277V / Type B ballast bypass operation
• Medium E26 base
• Equivalent to 150W HID fixtures
• 360° beam angle
• UL approved for enclosed fixtures
• Operating temperature: -40° to 113° F
• 50,000 hour rated